Range:

• Sealing plug heads,
• Sealing wiring joints,
• Backs of ignition switches,
• Perfect for extreme waterproofing electronics,
• Put over soldered joins,
• Repairing automotive circuit boards,
• Repairing data cables,
• Repairing wire boxes,
• Sealing circuit boards and more.

Operation Steps:

• 1. Clean the surface to ensure it is free of dust, oil and water.
• 2. Wrap the glue evenly where it needs to be bonded.
• 3. Let stand for 24 hours and wait for the gel to cure before use, if you want better effect then apply the glue again after curing.

Matters Needing Attention:

• 1.Please save and use in well-ventilated environment.
• 2.In case of contact with skin and eyes, please rinse with plenty of water.
• 3.Please keep away from children.
• 4.Keep away from sources of ignition.
• 5.Shelf life: 24 months (8-16?), manufacturer date on bottom of tube, storage temperature and opening will affect the shelf life, as long as not dry it will work.
• 6.Tighten the bottle cap after use and store it in a sealed manner.
• 7.Due to the diversity and uncertainty of the substrate, please conduct a practical test before use.

Description

Please see image before ordering to avoid mistakes.
Best value for money.
ORO products are a high quality replacement part and carries our guarantee of your satisfaction.
Easy to install but if unsure please use a professional

Cross Reference Numbers Only: